On the at91sam9x5 SoC series, GPIO banks B and D only have 19 and 22 pins. So add a property to set this parameter.
Acked-by: Nicolas Ferre <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]> --- .../devicetree/bindings/gpio/gpio_atmel.txt | 5 +++ arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ arch/arm/mach-at91/gpio.c | 33 +++++++++++++------- 3 files changed, 29 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt index 66efc80..85f8c0d 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt @@ -9,6 +9,10 @@ Required properties: unused). - gpio-controller: Marks the device node as a GPIO controller. +optional properties: +- #gpio-lines: Number of gpio if absent 32. + + Example: pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; @@ -16,5 +20,6 @@ Example: interrupts = <2 4>; #gpio-cells = <2>; gpio-controller; + #gpio-lines = <19>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index bc6cd3f..b3efecb 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -130,6 +130,7 @@ interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; + #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; }; @@ -150,6 +151,7 @@ interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; + #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; }; diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 3b8f463..a34f0ed 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -33,6 +33,8 @@ #include "generic.h" +#define MAX_NB_GPIO_PER_BANK 32 + struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ @@ -56,7 +58,7 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, nr_gpio) \ +#define AT91_GPIO_CHIP(name) \ { \ .chip = { \ .label = name, \ @@ -67,16 +69,16 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ .to_irq = at91_gpiolib_to_irq, \ - .ngpio = nr_gpio, \ + .ngpio = MAX_NB_GPIO_PER_BANK, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 32), - AT91_GPIO_CHIP("pioB", 32), - AT91_GPIO_CHIP("pioC", 32), - AT91_GPIO_CHIP("pioD", 32), - AT91_GPIO_CHIP("pioE", 32), + AT91_GPIO_CHIP("pioA"), + AT91_GPIO_CHIP("pioB"), + AT91_GPIO_CHIP("pioC"), + AT91_GPIO_CHIP("pioD"), + AT91_GPIO_CHIP("pioE"), }; static int gpio_banks; @@ -91,7 +93,7 @@ static unsigned long at91_gpio_caps; static inline void __iomem *pin_to_controller(unsigned pin) { - pin /= 32; + pin /= MAX_NB_GPIO_PER_BANK; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -100,7 +102,7 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - return 1 << (pin % 32); + return 1 << (pin % MAX_NB_GPIO_PER_BANK); } @@ -992,6 +994,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np) { int alias_idx; struct at91_gpio_chip *at91_gpio; + uint32_t ngpio; if (!np) return; @@ -1004,7 +1007,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np) } at91_gpio = &gpio_chip[alias_idx]; - at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = alias_idx * MAX_NB_GPIO_PER_BANK; at91_gpio->regbase = of_iomap(np, 0); if (!at91_gpio->regbase) { @@ -1024,6 +1027,14 @@ static void __init of_at91_gpio_init_one(struct device_node *np) if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) at91_gpio_caps |= AT91_GPIO_CAP_PIO3; + if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) { + if (ngpio >= MAX_NB_GPIO_PER_BANK) + pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n", + alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK); + else + at91_gpio->chip.ngpio = ngpio; + } + /* Setup clock */ if (at91_gpio_setup_clk(alias_idx)) goto ioremap_err; @@ -1061,7 +1072,7 @@ static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) { struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; at91_gpio->pioc_hwirq = pioc_hwirq; at91_gpio->pioc_idx = idx; -- 1.7.10.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
