On Tue, Sep 25, 2012 at 10:10 AM, Jean-Christophe PLAGNIOL-VILLARD <[email protected]> wrote: > On 09:28 Tue 25 Sep , Fabio Porcedda wrote: >> Tested on an at91sam9260 board (evk-pro3) >> >> Signed-off-by: Fabio Porcedda <[email protected]> >> --- >> .../devicetree/bindings/watchdog/atmel-wdt.txt | 19 +++++++++++++++++++ >> drivers/watchdog/at91sam9_wdt.c | 21 >> +++++++++++++++++++++ >> 2 files changed, 40 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/watchdog/atmel-wdt.txt >> >> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt >> b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt >> new file mode 100644 >> index 0000000..724fad1 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt >> @@ -0,0 +1,19 @@ >> +* Atmel Watchdog Timers >> + >> +** at91sam9-wdt >> + >> +Required properties: >> +- compatible: must be "atmel,at91sam9-wdt". >> +- reg: physical base address of the controller and length of memory mapped >> + region. >> + >> +Optional properties: >> +- heartbeat: contains the watchdog heartbeats in seconds. >> + >> +Example: >> + >> + watchdog@fffffd40 { >> + compatible = "atmel,at91sam9-wdt"; > for the secind time atmel,at91sam9260-watchdog
Ok, i will fix this. > you need to put the first soc that use it in the compatible >> + reg = <0xfffffd40 0x10>; >> + heartbeat = <10>; > need put second in the property name so need to read the doc I didn't found any example about a property with "second" in the name. Which It's best "heartbeat-seconds", "heartbeat-sec" or "heartbeat-s" ? > Best Regards, > J. Thanks for the review and my best regards -- Fabio Porcedda _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
