Thomas Abraham wrote: > > Add a minimal board dts file for Samsung Exynos4412 based SMDK board. > > Signed-off-by: Thomas Abraham <[email protected]> > --- > This patch depends the on the following patch posted by Tomasz Figa. > "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 > +++++++++++++++++++++++++++++ > 2 files changed, 46 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f37cf9f..36488a5 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > exynos4210-smdkv310.dtb \ > exynos4210-trats.dtb \ > + exynos4412-smdk4412.dtb \ > exynos5250-smdk5250.dtb > dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ > diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts > b/arch/arm/boot/dts/exynos4412-smdk4412.dts > new file mode 100644 > index 0000000..f05bf57 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > @@ -0,0 +1,45 @@ > +/* > + * Samsung's Exynos4412 based SMDK board device tree source > + * > + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Device tree source file for Samsung's SMDK4412 board which is based on > + * Samsung's Exynos4412 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +/include/ "exynos4412.dtsi" > + > +/ { > + model = "Samsung SMDK evaluation board based on Exynos4412"; > + compatible = "samsung,smdk4412", "samsung,exynos4412"; > + > + memory { > + reg = <0x40000000 0x40000000>; > + }; > + > + chosen { > + bootargs ="root=/dev/ram0 rw ramdisk=8192 > initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; > + }; > + > + serial@13800000 { > + status = "okay"; > + }; > + > + serial@13810000 { > + status = "okay"; > + }; > + > + serial@13820000 { > + status = "okay"; > + }; > + > + serial@13830000 { > + status = "okay"; > + }; > +}; > -- > 1.6.6.rc2
Looks good to me, will apply. BTW, its default console is ttySAC1 not ttySAC2? Thanks. Best regards, Kgene. -- Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
