On Thu, 15 Nov 2012, Grant Likely wrote:
On Sun, 11 Nov 2012 17:21:29 +0100, Andrew Lunn <[email protected]> wrote:
From: Jamie Lentin <[email protected]>
Given appropriate devicetree bindings, this driver registers a
pm_power_off function to set a GPIO line high/low to power down
your board.
Signed-off-by: Jamie Lentin <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
---
.../devicetree/bindings/gpio/gpio-poweroff.txt | 22 ++++
drivers/gpio/Kconfig | 10 ++
drivers/gpio/Makefile | 2 +
drivers/gpio/gpio-poweroff.c | 129 ++++++++++++++++++++
This isn't a gpio controller driver. Don't put it into drivers/gpio
There's a v2 which puts it in drivers/power/reset/gpio-poweroff.c
g.
--
Jamie Lentin
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
