Hi Andrew,
On Tue, Nov 13, 2012 at 04:44:45PM +0100, Andrew Lunn wrote:
> Signed-off-by: Andrew Lunn <[email protected]>
> ---
> arch/arm/boot/dts/kirkwood-ib62x0.dts | 6 ++++++
> arch/arm/mach-kirkwood/board-ib62x0.c | 13 -------------
> 2 files changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts
> b/arch/arm/boot/dts/kirkwood-ib62x0.dts
> index 66794ed..9b0e2e3 100644
> --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
> +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
> @@ -79,4 +79,10 @@
> gpios = <&gpio0 27 0>;
> };
> };
> + gpio_poweroff {
> + compatible = "gpio-poweroff";
> + gpios = <&gpio0 24 1>;
This needs to be:
gpios = <&gpio0 24 0>;
If the GPIO is configured as an input, the box shuts down when
initializing the driver.
With this change:
Tested-by: Simon Baatz <[email protected]>
Btw., I also tested it on top of your pinctrl changes, which works
like a charm as well.
- Simon
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
