Add device-tree nodes for the two Cross Trigger Interface (CTI) modules in the OMAP4 devices.
Signed-off-by: Jon Hunter <[email protected]> --- arch/arm/boot/dts/omap4.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 739bb79..40270c7 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -59,6 +59,29 @@ interrupts = <1 13 0x304>; }; + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cti0: cti@0x54148000 { + compatible = "arm,primecell"; + interrupts = <0 1 0x4>; + reg = <0x54148000 0x1000>; + arm,cti-name = "cti0"; + arm,primecell-periphid = <0x003bb906>; + }; + + cti1: cti@0x54149000 { + compatible = "arm,primecell"; + interrupts = <0 2 0x4>; + reg = <0x54149000 0x1000>; + arm,cti-name = "cti1"; + arm,primecell-periphid = <0x003bb906>; + }; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. -- 1.7.10.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
