On Fri, Dec 14, 2012 at 11:33:13, AnilKumar, Chimata wrote: > Add PM power_off control to rtc driver and PMIC status is set to > STATUS_OFF to shutdown PMIC if PWR_EN is toggled by RTC module. > > System power off sequence:- > * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low > * Enable PMIC_POWER_EN in rtc module > * Set rtc ALARM2 time > * Enable ALARM2 interrupt > > These patches were tested on am335x-bone (BeagleBone). These patchs > are based on linux-next.
Hi All, Happy New Year Gentle ping to this series Thanks AnilKumar > Changes from v3: > - TPS65217 mfd driver changes are accepted so dropped > from this series. > - With recent changes in the kernel, reboot_mutex held BUG() > is not seen so removed while(1); from rtc_power_off. > - Removed spinlock before while(1); which is not necessary. > > Changes from v2: > - Incorporated Kevin's comment on v2 > * Enabled RTC in ompa2plus_defconfig > > Changes from v1: > - Incorporated Vaibhav's comments on v1 > * Changed the time rollover logic with the help of > rtc-lib APIs > > AnilKumar Ch (3): > ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone > ARM: dts: AM33XX: Enable system power off control in am335x-bone > ARM: OMAP2+: omap2plus_defconfig: Enable RTC support > > Colin Foe-Parker (1): > rtc: OMAP: Add system pm_power_off to rtc driver > > Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++ > arch/arm/boot/dts/am335x-bone.dts | 6 ++ > arch/arm/configs/omap2plus_defconfig | 1 + > drivers/rtc/rtc-omap.c | 74 > +++++++++++++++++++- > 4 files changed, 85 insertions(+), 1 deletion(-) > > -- > 1.7.9.5 > > _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
