On Thu, Jan 31, 2013 at 01:07:35PM +0100, Gregory CLEMENT wrote: > On 01/30/2013 07:10 PM, Jason Cooper wrote: > > > > Gregory, > > > > Adding devicetree-discuss. > > I should have added it in in CC in my first version > > > > > Guys, how do you prefer to handle plug-in RAM modules? describe the > > soldered-in amount, or? > > > > On Wed, Jan 30, 2013 at 06:35:17PM +0100, Gregory CLEMENT wrote: > >> On 01/30/2013 06:33 PM, Jason Cooper wrote: > >>> On Wed, Jan 30, 2013 at 06:26:14PM +0100, Gregory CLEMENT wrote: > >>>> This is the new Armada XP evaluation board from Marvell. It comes with > >>>> a RS232 port over USB, a SATA link, an internal SSD, 4 Ethernet > >>>> Gigabit links. > >>>> > >>>> Support for USB (Host and device), SDIO, PCIe will be added as drivers > >>>> when they become available for Armada XP in mainline. > >>>> > >>>> Signed-off-by: Gregory CLEMENT <[email protected]> > >>>> --- > >>>> arch/arm/boot/dts/Makefile | 1 + > >>>> arch/arm/boot/dts/armada-xp-gp.dts | 94 > >>>> ++++++++++++++++++++++++++++++++++++ > >>>> 2 files changed, 95 insertions(+) > >>>> create mode 100644 arch/arm/boot/dts/armada-xp-gp.dts > >>>> > > ... > >>>> + memory { > >>>> + device_type = "memory"; > >>>> + reg = <0x00000000 0xC0000000>; /* 3 GB */ > >>> > >>> Is this the soldered on the board amount, or the amount with an > >>> expandable slot filled? > >> > >> It is not soldered, so you can change the amount of memory > > > > Well, there's something we don't encounter too much in the embedded > > world. ;-) I'm inclined to think the entry here should be the soldered > > on amount, and the bootloader would (hypothetically) change the DT to > > the probed amount. But I haven't seen a precedent set yet... > > Well on this board there is no soldered memory at all.
So it has two slots? 1GB and 2GB? thx, Jason. _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
