This is the new Armada XP evaluation board from Marvell. It comes with a RS232 port over USB, a SATA link, an internal SSD, 4 Ethernet Gigabit links.
Support for USB (Host and device), SDIO, PCIe will be added as drivers when they become available for Armada XP in mainline. Tested-by: Simon Guinot <[email protected]> Tested-by: Florian Fainelli <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-xp-gp.dts | 101 ++++++++++++++++++++++++++++++++++++ 2 files changed, 102 insertions(+) create mode 100644 arch/arm/boot/dts/armada-xp-gp.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5ebb44f..51aab4b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-xp-db.dtb \ + armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ imx53-ard.dtb \ diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts new file mode 100644 index 0000000..50e44e7 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -0,0 +1,101 @@ +/* + * Device Tree file for Marvell Armada XP development board + * (DB-MV784MP-GP) + * + * Copyright (C) 2013 Marvell + * + * Lior Amsalem <[email protected]> + * Gregory CLEMENT <[email protected]> + * Thomas Petazzoni <[email protected]> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp-mv78460.dtsi" + +/ { + model = "Marvell Armada XP Development Board: DB-MV784MP-GP"; + compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + + /* + * 4 GB of plug-in RAM modules by default but only 3GB + * are visible, the amount of memory available can be + * changed by he bootloader according the size of the + * module actually pluged + */ + reg = <0x00000000 0xC0000000>; + }; + + soc { + serial@d0012000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012300 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@d00a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; + }; + + ethernet@d0070000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@d0074000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@d0030000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "rgmii-id"; + }; + ethernet@d0034000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "rgmii-id"; + }; + }; +}; -- 1.7.9.5 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
