On Wed, Feb 06, 2013 at 07:37:37PM +0000, Jonathan Cameron wrote:
> On 02/06/2013 06:29 PM, Guenter Roeck wrote:
> > Provide bindings and parse OF data during initialization.
> > 
> > Signed-off-by: Guenter Roeck <[email protected]>
> looks good to me.  Couple of little queries inline.
> 
[ ... ]

> > +
> > +Example for a configuration with trigger:
> > +
> > +   adc@35 {
> > +           compatible = "maxim,max1139";
> > +           reg = <0x35>;
> > +
> > +           adc: iio-device {
> > +                   #io-channel-cells = <1>;
> > +           };
> > +           trigger: iio-trigger {
> > +                   #io-channel-cells = <1>;
> Why would the trigger have channel-cells?
> So far we don't have any device tree stuff for the triggers.

I thought about keeping the example and adding a note that trigger support is
not currently implemented, but a better idea is to replace it with a second iio
device. I'll do that unless someone objects.

        adc@35 {
                compatible = "some-vendor,some-adc";
                reg = <0x35>;

                adc1: iio-device@0 {
                        #io-channel-cells = <1>;
                        /* other properties */
                };
                adc2: iio-device@1 {
                        #io-channel-cells = <1>;
                        /* other properties */
                };
        };

> > +
> > +==Example==
> > +
> > +   adc: max1139@35 {
> > +           compatible = "maxim,max1139";
> > +           reg = <0x35>;
> > +           #io-channel-cells = <1>;
> > +   };
> > +
> > +   ...
> > +
> > +   iio_hwmon {
> > +           compatible = "iio-hwmon";
> > +           io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
> > +                   <&adc 3>, <&adc 4>, <&adc 5>,
> > +                   <&adc 6>, <&adc 7>, <&adc 8>,
> > +                   <&adc 9>, <&adc 10>, <&adc 11>;
> > +           io-channel-names = "vcc", "vdd", "vref", "1.2V";
> This example still seems a little odd. Why give one where there are
> more channels than names?

I replaced the example with

        iio_hwmon {
                compatible = "iio-hwmon";
                io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
                        <&adc 3>, <&adc 4>, <&adc 5>,
                        <&adc 6>, <&adc 7>, <&adc 8>,
                        <&adc 9>;
                }; 

        some_consumer {
                compatible = "some-consumer";
                io-channels = <&adc 10>, <&adc 11>;
                io-channel-names = "adc1", "adc2";
        };

Guenter
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to