On 03/14/2013 11:02 AM, Hector Palacios wrote:
Hello,
Maybe I'm missing something but the MXS processors (at least i.MX23 and i.MX28)
cannot
set the polarity of the GPIOs, so shouldn't the #gpio-cells be 1?
(From Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt):
Sorry, I meant: from Documentation/devicetree/bindings/gpio/gpio-mxs.txt
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify the gpio polarity:
0 = active high
1 = active low
Regards,
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
