This patch fixes the board to be able to use the rtc-m48t86 driver again.
Signed-off-by: Alexander Clouter <[email protected]>
---
arch/arm/mach-orion5x/ts78xx-setup.c | 79 ++++++++--------------------------
1 file changed, 18 insertions(+), 61 deletions(-)
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c
b/arch/arm/mach-orion5x/ts78xx-setup.c
index e960855..4ed4c56 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -16,13 +16,13 @@
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
-#include <linux/m48t86.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/timeriomem-rng.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/ioport.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
@@ -80,78 +80,35 @@ static struct mv_sata_platform_data ts78xx_sata_data = {
/*****************************************************************************
* RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
****************************************************************************/
-#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x808)
-#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE + 0x80c)
+#define TS_RTC_INDEX (TS78XX_FPGA_REGS_PHYS_BASE + 0x808)
+#define TS_RTC_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x80c)
-static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
-{
- writeb(addr, TS_RTC_CTRL);
- return readb(TS_RTC_DATA);
-}
-
-static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
-{
- writeb(addr, TS_RTC_CTRL);
- writeb(value, TS_RTC_DATA);
-}
-
-static struct m48t86_ops ts78xx_ts_rtc_ops = {
- .readbyte = ts78xx_ts_rtc_readbyte,
- .writebyte = ts78xx_ts_rtc_writebyte,
+static struct resource ts78xx_ts_rtc_resources[] = {
+ DEFINE_RES_NAMED(TS_RTC_INDEX, 4, "rtc_index", IORESOURCE_MEM),
+ DEFINE_RES_NAMED(TS_RTC_DATA, 4, "rtc_data", IORESOURCE_MEM),
};
static struct platform_device ts78xx_ts_rtc_device = {
.name = "rtc-m48t86",
.id = -1,
- .dev = {
- .platform_data = &ts78xx_ts_rtc_ops,
- },
- .num_resources = 0,
+ .resource = ts78xx_ts_rtc_resources,
+ .num_resources = ARRAY_SIZE(ts78xx_ts_rtc_resources),
};
-/*
- * TS uses some of the user storage space on the RTC chip so see if it is
- * present; as it's an optional feature at purchase time and not all boards
- * will have it present
- *
- * I've used the method TS use in their rtc7800.c example for the detection
- *
- * TODO: track down a guinea pig without an RTC to see if we can work out a
- * better RTC detection routine
- */
static int ts78xx_ts_rtc_load(void)
{
int rc;
- unsigned char tmp_rtc0, tmp_rtc1;
-
- tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
- tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
-
- ts78xx_ts_rtc_writebyte(0x00, 126);
- ts78xx_ts_rtc_writebyte(0x55, 127);
- if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
- ts78xx_ts_rtc_writebyte(0xaa, 127);
- if (ts78xx_ts_rtc_readbyte(127) == 0xaa
- && ts78xx_ts_rtc_readbyte(126) == 0x00) {
- ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
- ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
-
- if (ts78xx_fpga.supports.ts_rtc.init == 0) {
- rc =
platform_device_register(&ts78xx_ts_rtc_device);
- if (!rc)
- ts78xx_fpga.supports.ts_rtc.init = 1;
- } else
- rc = platform_device_add(&ts78xx_ts_rtc_device);
-
- if (rc)
- pr_info("RTC could not be registered: %d\n",
- rc);
- return rc;
- }
- }
- pr_info("RTC not found\n");
- return -ENODEV;
+ if (ts78xx_fpga.supports.ts_rtc.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_rtc_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_rtc.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_rtc_device);
+
+ if (rc)
+ pr_info("RTC could not be registered: %d\n", rc);
+ return rc;
};
static void ts78xx_ts_rtc_unload(void)
--
1.7.10.4
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
