Hello, 2013/3/26 Matthias Brugger <[email protected]>
> TI omap2 mcspi allows the slave devices to configure the behavior of > the SPI master. This patch adds device tree support to the existing > options. > > Signed-off-by: Matthias Brugger <[email protected]> > --- > Any comments on this patch? > Documentation/devicetree/bindings/spi/omap-spi.txt | 23 ++++++++++++ > drivers/spi/spi-omap2-mcspi.c | 41 > ++++++++++++++++++++++ > 2 files changed, 64 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt > b/Documentation/devicetree/bindings/spi/omap-spi.txt > index 938809c..fef16bf 100644 > --- a/Documentation/devicetree/bindings/spi/omap-spi.txt > +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt > @@ -10,8 +10,20 @@ Required properties: > input. The default is D0 as input and > D1 as output. > > +SPI Controller specific data in SPI slave nodes: > + > +- The spi slave nodes can provide the following information which is used > + by the spi controller. > + > +- ti,spi-cs-per-word: Set chipselect to be toggled on every word send. > + > +- ti,spi-turbo-mode: Set turbo mode for this device. > + > + > Example: > > +- SoC Specific Portion: > + > mcspi1: mcspi@1 { > #address-cells = <1>; > #size-cells = <0>; > @@ -20,3 +32,14 @@ mcspi1: mcspi@1 { > ti,spi-num-cs = <4>; > }; > > +- Board Specific Portion: > + > + spi-device@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + > + controller-data { > + ti,spi-cs-per-word = <1>; > + ti,spi-turbo-mode = <0>; > + }; > + }; > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > index 893c3d7..1ae5009 100644 > --- a/drivers/spi/spi-omap2-mcspi.c > +++ b/drivers/spi/spi-omap2-mcspi.c > @@ -731,11 +731,47 @@ static u32 omap2_mcspi_calc_divisor(u32 speed_hz) > return 15; > } > > +static struct omap2_mcspi_device_config *omap2_mcspi_get_slave_ctrldata( > + struct spi_device *spi) > +{ > + struct omap2_mcspi_device_config *cd; > + struct device_node *slave_np, *data_np = NULL; > + > + slave_np = spi->dev.of_node; > + if (!slave_np) { > + dev_err(&spi->dev, "device node not found\n"); > + return ERR_PTR(-EINVAL); > + } > + > + data_np = of_get_child_by_name(slave_np, "controller-data"); > + if (!data_np) { > + dev_err(&spi->dev, "child node 'controller-data' not > found\n"); > + return ERR_PTR(-EINVAL); > + } > + > + cd = kzalloc(sizeof(*cd), GFP_KERNEL); > + if (!cd) { > + dev_err(&spi->dev, "could not allocate memory for > controller data\n"); > + of_node_put(data_np); > + return ERR_PTR(-ENOMEM); > + } > + > + if (of_get_property(data_np, "ti,spi-cs-per-word", NULL)) > + cd->cs_per_word = 1; > + > + if (of_get_property(data_np, "ti,spi-turbo-mode", NULL)) > + cd->turbo_mode = 1; > + > + of_node_put(data_np); > + return cd; > +} > + > /* called only when no transfer is active to this device */ > static int omap2_mcspi_setup_transfer(struct spi_device *spi, > struct spi_transfer *t) > { > struct omap2_mcspi_cs *cs = spi->controller_state; > + struct omap2_mcspi_device_config *cd = spi->controller_data; > struct omap2_mcspi *mcspi; > struct spi_master *spi_cntrl; > u32 l = 0, div = 0; > @@ -745,6 +781,11 @@ static int omap2_mcspi_setup_transfer(struct > spi_device *spi, > mcspi = spi_master_get_devdata(spi->master); > spi_cntrl = mcspi->master; > > + if (!cd && spi->dev.of_node) { > + cd = omap2_mcspi_get_slave_ctrldata(spi); > + spi->controller_data = cd; > + } > + > if (t != NULL && t->bits_per_word) > word_len = t->bits_per_word; > > -- > 1.7.11.7 > > -- --- motzblog.wordpress.com
_______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
