From: Linus Walleij <[email protected]> Now that we have enabled board power and the AB3100 regulators, put the regulator data into the device tree and enable it so we can start to tie regulators to devices. To begin with we're only supplying the power to the board itself.
Cc: Mark Brown <[email protected]> Signed-off-by: Linus Walleij <[email protected]> --- arch/arm/boot/dts/ste-u300.dts | 79 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 784e17a..1b3ec2d 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -24,6 +24,11 @@ reg = <0x48000000 0x03c00000>; }; + s365 { + compatible = "stericsson,s365"; + vana15-supply = <&ab3100_ldo_d_reg>; + }; + timer: timer0@c0014000 { compatible = "stericsson,u300-apptimer"; reg = <0xc0014000 0x1000>; @@ -70,6 +75,74 @@ interrupts = <8>; #address-cells = <1>; #size-cells = <0>; + ab3100: ab3100@0x48 { + compatible = "stericsson,ab3100"; + reg = <0x48>; + interrupt-parent = <&vica>; + interrupts = <0>; /* EXT0 IRQ */ + ab3100-regulators { + compatible = "stericsson,ab3100-regulators"; + ab3100_ldo_a_reg: ab3100_ldo_a { + regulator-compatible = "ab3100_ldo_a"; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_c_reg: ab3100_ldo_c { + regulator-compatible = "ab3100_ldo_c"; + startup-delay-us = <200>; + }; + ab3100_ldo_d_reg: ab3100_ldo_d { + regulator-compatible = "ab3100_ldo_d"; + startup-delay-us = <200>; + }; + ab3100_ldo_e_reg: ab3100_ldo_e { + regulator-compatible = "ab3100_ldo_e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_f_reg: ab3100_ldo_f { + regulator-compatible = "ab3100_ldo_f"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + startup-delay-us = <600>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_g_reg: ab3100_ldo_g { + regulator-compatible = "ab3100_ldo_g"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2850000>; + startup-delay-us = <400>; + }; + ab3100_ldo_h_reg: ab3100_ldo_h { + regulator-compatible = "ab3100_ldo_h"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ldo_k_reg: ab3100_ldo_k { + regulator-compatible = "ab3100_ldo_k"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ext_reg: ab3100_ext { + regulator-compatible = "ab3100_ext"; + }; + ab3100_buck_reg: ab3100_buck { + regulator-compatible = "ab3100_buck"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; i2c1: i2c@c0005000 { @@ -79,6 +152,12 @@ interrupts = <9>; #address-cells = <1>; #size-cells = <0>; + fwcam0: fwcam@0x10 { + reg = <0x10>; + }; + fwcam1: fwcam@0x5d { + reg = <0x5d>; + }; }; amba { -- 1.7.11.3 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
