Hi Vikas, On Wednesday 08 of May 2013 11:31:34 Vikas Sajjan wrote: > Adds display timing node for a DP panel to Arndale Board DTS file > > Signed-off-by: Vikas Sajjan <[email protected]> > --- > arch/arm/boot/dts/exynos5250-arndale.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts > b/arch/arm/boot/dts/exynos5250-arndale.dts index f68b820..c831a5c > 100644 > --- a/arch/arm/boot/dts/exynos5250-arndale.dts > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts > @@ -459,4 +459,20 @@ > samsung,lane-count = <4>; > }; > > + display-timings { > + native-mode = <&timing0>; > + timing0: timing@0 { > + /* 2560x1600 DP panel */ > + clock-frequency = <50000>; > + hactive = <2560>; > + vactive = <1600>; > + hfront-porch = <48>; > + hback-porch = <80>; > + hsync-len = <32>; > + vback-porch = <16>; > + vfront-porch = <8>; > + vsync-len = <6>; > + }; > + };
What display are those timings used for? Shouldn't they be placed inside node of that display? Best regards, Tomasz _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
