> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index ed11bcf..e6174c7 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -323,6 +323,64 @@
> >;
> };
> };
> +
> + weim {
> + pinctrl_weim_nor_1: weim_norgrp-1 {
> + fsl,pins = <
> +
> MX6Q_PAD_EIM_OE__EIM_OE_B 0x10
> + MX6Q_PAD_EIM_RW__EIM_RW
> 0x10
> +
> MX6Q_PAD_EIM_CS0__EIM_CS0_B 0x10
> +
> MX6Q_PAD_EIM_LBA__EIM_LBA_B 0x10
> +
> MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0x8000
> +
> MX6Q_PAD_EIM_BCLK__EIM_BCLK 0x8000
The following values are derived using Table 4-1 of "i.MX 6Dual/6Quad
Applications Processor Reference Manual Document Number: IMX6DQRM Rev. 1,
04/2013":
MX6Q_PAD_EIM_OE__WEIM_WEIM_OE 0xb0b1
MX6Q_PAD_EIM_RW__WEIM_WEIM_RW 0xb0b1
MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 0xb0b1
MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT 0xb060
(I wrote a short C program that parses a human-readable property table for the
pins and spits out hex to generate them.) How are 0x10 values calculated?
Are settings for MX6Q_PAD_EIM_LBA__EIM_LBA_B and MX6Q_PAD_EIM_BCLK__EIM_BCLK
useful? We run NOR without them.
> +
> MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1
> +
> MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1
> +
> MX6Q_PAD_EIM_DA15__EIM_AD15 0xb0b1
> +
> MX6Q_PAD_EIM_DA14__EIM_AD14 0xb0b1
> +
> MX6Q_PAD_EIM_DA13__EIM_AD13 0xb0b1
Are these names correct? "MX6Q_PAD_EIM_A16__EIM_ADDR16" but
"MX6Q_PAD_EIM_DA15__EIM_AD15" et cetera?
--
Alison Chaiken
[email protected]
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
