This patch set adds a new driver for WEIM in the imx6q{dl}-sabreauto boards.
The WEIM(Wireless External Interface Module) works like a bus.
You can attach many different devices on it, such as NOR, onenand.
In the case of i.MX6q-sabreauto, only the NOR is connected to WEIM.
v1 --> v2:
[0] remove used PADs.
[1] fix the wrong pad values, (thanks Alison Chaiken)
[2] remove the weim-cs-index.
[3] add "fsl" for the weim-cs-timing.
[4] remove the partitions info in the document.
[5] rewrite the drivers(follow Sascha and Shawn's comments)
Huang Shijie (6):
drivers: bus: add a new driver for WEIM
ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM
ARM: dts: imx6qdl: add more information for WEIM
ARM: dts: imx6q: add pinctrl for WEIM NOR
ARM: dts: imx6dl: add a pinctrl for WEIM NOR
ARM: dts: imx6qdl: enable the WEIM NOR
Documentation/devicetree/bindings/bus/imx-weim.txt | 50 +++++++
arch/arm/boot/dts/imx6dl-sabreauto.dts | 9 +-
arch/arm/boot/dts/imx6dl.dtsi | 55 ++++++++
arch/arm/boot/dts/imx6q-sabreauto.dts | 9 +-
arch/arm/boot/dts/imx6q.dtsi | 56 ++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 22 +++-
arch/arm/boot/dts/imx6qdl.dtsi | 4 +-
drivers/bus/Kconfig | 9 ++
drivers/bus/Makefile | 1 +
drivers/bus/imx-weim.c | 146 ++++++++++++++++++++
10 files changed, 357 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt
create mode 100644 drivers/bus/imx-weim.c
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
