On Tue, 04 Jun 2013, J Keerthy wrote:

> From: Graeme Gregory <[email protected]>
> 
> Add the various binding files for the palmas family of chips. There is a
> top level MFD binding then a seperate binding for regulators IP blocks on 
> chips.
> 
> Signed-off-by: Graeme Gregory <[email protected]>
> Signed-off-by: J Keerthy <[email protected]>
> Signed-off-by: Ian Lartey <[email protected]>
> ---
> Changes from v1:
> * Corrected ti,ldo6_vibrator property ---> ti,ldo6-vibrator
> * Added the irq.h header file inclusion for defining type of interrupt
> 
>  Documentation/devicetree/bindings/mfd/palmas.txt   |   49 +++++++++++++++
>  .../devicetree/bindings/regulator/palmas-pmic.txt  |   65 
> ++++++++++++++++++++
>  2 files changed, 114 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/palmas.txt
>  create mode 100644 
> Documentation/devicetree/bindings/regulator/palmas-pmic.txt

Is there a driver to go with this patch, or was the documentation an
afterthought in this case? If the latter is true I'd be happy to apply
this patch with an Ack from Stephen or one of the other previous
reviewers.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to