On 06/11/2013 04:48 PM, Florian Vaussard wrote: > Use the MTD constants for NAND and OneNAND nodes used in OMAP3 > DTS. > > Signed-off-by: Florian Vaussard <[email protected]> > --- > arch/arm/boot/dts/omap3-devkit8000.dts | 10 +++++----- > arch/arm/boot/dts/omap3-igep0020.dts | 10 +++++----- > arch/arm/boot/dts/omap3-igep0030.dts | 10 +++++----- > arch/arm/boot/dts/omap3430-sdp.dts | 28 ++++++++++++++-------------- > 4 files changed, 29 insertions(+), 29 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts > b/arch/arm/boot/dts/omap3-devkit8000.dts > index 5be71b1..08699cb 100644 > --- a/arch/arm/boot/dts/omap3-devkit8000.dts > +++ b/arch/arm/boot/dts/omap3-devkit8000.dts > @@ -143,27 +143,27 @@ > > x-loader@0 { > label = "X-Loader"; > - reg = <0 0x80000>; > + reg = <(0 * SZ_128K) (4 * SZ_128K)>; > }; > > bootloaders@80000 { > label = "U-Boot"; > - reg = <0x80000 0x1e0000>; > + reg = <(4 * SZ_128K) (15 * SZ_128K)>; > }; > > bootloaders_env@260000 { > label = "U-Boot Env"; > - reg = <0x260000 0x20000>; > + reg = <(19 * SZ_128K) (1 * SZ_128K)>; > }; > > kernel@280000 { > label = "Kernel"; > - reg = <0x280000 0x400000>; > + reg = <(20 * SZ_128K) (32 * SZ_128K)>; > }; > > filesystem@680000 { > label = "File System"; > - reg = <0x680000 0xf980000>; > + reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>; > }; > }; > }; > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts > b/arch/arm/boot/dts/omap3-igep0020.dts > index e8c4828..3476b3c 100644 > --- a/arch/arm/boot/dts/omap3-igep0020.dts > +++ b/arch/arm/boot/dts/omap3-igep0020.dts > @@ -97,23 +97,23 @@ > > partition@0 { > label = "SPL"; > - reg = <0 0x100000>; > + reg = <(0 * SZ_256K) (4 * SZ_256K)>; > }; > partition@0x80000 { > label = "U-Boot"; > - reg = <0x100000 0x180000>; > + reg = <(4 * SZ_256K) (6 * SZ_256K)>; > }; > partition@0x1c0000 { > label = "Environment"; > - reg = <0x280000 0x100000>; > + reg = <(10 * SZ_256K) (4 * SZ_256K)>; > }; > partition@0x280000 { > label = "Kernel"; > - reg = <0x380000 0x300000>; > + reg = <(14 * SZ_256K) (12 * SZ_256K)>; > }; > partition@0x780000 { > label = "Filesystem"; > - reg = <0x680000 0x1f980000>; > + reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>; > }; > }; > > diff --git a/arch/arm/boot/dts/omap3-igep0030.dts > b/arch/arm/boot/dts/omap3-igep0030.dts > index 644d053..e4f078c 100644 > --- a/arch/arm/boot/dts/omap3-igep0030.dts > +++ b/arch/arm/boot/dts/omap3-igep0030.dts > @@ -72,23 +72,23 @@ > > partition@0 { > label = "SPL"; > - reg = <0 0x100000>; > + reg = <(0 * SZ_256K) (4 * SZ_256K)>; > }; > partition@0x80000 { > label = "U-Boot"; > - reg = <0x100000 0x180000>; > + reg = <(4 * SZ_256K) (6 * SZ_256K)>; > }; > partition@0x1c0000 { > label = "Environment"; > - reg = <0x280000 0x100000>; > + reg = <(10 * SZ_256K) (4 * SZ_256K)>; > }; > partition@0x280000 { > label = "Kernel"; > - reg = <0x380000 0x300000>; > + reg = <(14 * SZ_256K) (12 * SZ_256K)>; > }; > partition@0x780000 { > label = "Filesystem"; > - reg = <0x680000 0x1f980000>; > + reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>; > }; > }; > };
Hi Florian, I don't have access to my IGEP board so I can test it right now but the patch looks good to me. In fact I wanted to use MTDPART_SIZ_FULL when added the NAND nodes since not all IGEP boards have 512MB flash but I didn't know that a value of 0 meant that. So thanks a lot for doing this! Acked-by: Javier Martinez Canillas <[email protected]> _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
