Kukjin Kim wrote:
>
> Leela Krishna Amudala wrote:
> >
> > This patch adds examples to samsung-pinctrl.txt documentaion file
> > on how to make gpio binding and gpio request
> >
> > Signed-off-by: Leela Krishna Amudala <l.kris...@samsung.com>
> > Reviewed-by: Doug Anderson <diand...@chromium.org>
> > ---
> > .../bindings/pinctrl/samsung-pinctrl.txt | 48
> > +++++++++++++++++++-
> > 1 file changed, 46 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-
> pinctrl.txt
> > b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> > index b2bc219..f1cf177 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> > @@ -25,8 +25,18 @@ Required Properties:
> >
> > - gpio-controller: identifies the node as a gpio controller and pin
> > bank.
> > - #gpio-cells: number of cells in GPIO specifier. Since the generic
> > GPIO
> > - binding is used, the amount of cells must be specified as 2. See
> > generic
> > - GPIO binding documentation for description of particular cells.
> > + binding is used, the amount of cells must be specified as 2. See
the
> > below
> > + mentioned gpio binding representation for description of particular
> > cells.
> > +
> > + Eg: <&gpx2 6 0>
> > + <[phandle of the gpio controller node]
> > + [pin number within the gpio controller]
> > + [flags]>
> > +
> > + Values for gpio specifier:
> > + - Pin number: is a value between 0 to 7.
> > + - Flags: 0 - Active High
> > + 1 - Active Low
> >
> > - Pin mux/config groups as child nodes: The pin mux (selecting pin
> > function
> > mode) and pin config (pull up/down, driver strength) settings are
> > represented
> > @@ -274,3 +284,37 @@ Example 4: Set up the default pin state for uart
> > controller.
> >
> > pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> > }
> > +
> > +Example 5: A display port client node that supports 'default' pinctrl
> > state
> > + and gpio binding.
> > +
> > + display-port-controller {
> > + samsung,color-space = <0>;
> > + samsung,dynamic-range = <0>;
> > + samsung,ycbcr-coeff = <0>;
> > + samsung,color-depth = <1>;
> > + samsung,link-rate = <0x06>;
> > + samsung,lane-count = <2>;
> > + samsung,hpd-gpio = <&gpx2 6 0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&dp_hpd>;
> > + };
> > +
> > +Example 6: Request the gpio for display port controller
> > +
> > + static int exynos_dp_probe(struct platform_device *pdev)
> > + {
> > + int hpd_gpio, ret;
> > + struct device *dev = &pdev->dev;
> > + struct device_node *dp_node = dev->of_node;
> > +
> > + /* ... */
> > +
> > + hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio",
0);
> > +
> > + /* ... */
> > +
> > + ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
> > + "hpd_gpio");
> > + /* ... */
> > + }
> > --
> > 1.7.9.5
>
> Looks good to me, applied.
>
(+ Linus Walleij)
Hmm, probably I need Linus' ack on this ;-)
- Kukjin
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
