On Tue, Jun 25, 2013 at 08:50:43AM +0200, Jan Lübbe wrote:
> On Mon, 2013-06-24 at 15:32 -0500, Benoit Parrot wrote:
> > Add LCDC device node in DT for am33xx
> > Add LCDC and Panel info in DT for am335x-evm
> 
> > diff --git a/arch/arm/boot/dts/am335x-evm.dts 
> > b/arch/arm/boot/dts/am335x-evm.dts
> > index 0423298..40d7a3f 100644
> > --- a/arch/arm/boot/dts/am335x-evm.dts
> > +++ b/arch/arm/boot/dts/am335x-evm.dts
> > @@ -102,6 +136,16 @@
> >                             reg = <0x48>;
> >                     };
> >             };
> > +
> > +           lcdc {
> > +                   compatible = "ti,am33xx-tilcdc";
> > +                   reg = <0x4830e000 0x1000>;
> > +                   interrupt-parent = <&intc>;
> > +                   interrupts = <36>;
> > +                   ti,hwmods = "lcdc";
> > +                   ti,allow-non-reduced-blanking-modes;
> > +                   status = "okay";
> > +           };
> >     };
> >  
> >     vbat: fixedregulator@0 {
> >  /include/ "tps65910.dtsi"
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> > index 8e1248f..05b2c4a 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -415,5 +415,14 @@
> >                     #size-cells = <1>;
> >                     status = "disabled";
> >             };
> > +
> > +           lcdc: lcdc@4830e000 {
> > +                   compatible = "ti,am33xx-tilcdc";
> > +                   reg = <0x4830e000 0x1000>;
> > +                   interrupt-parent = <&intc>;
> > +                   interrupts = <36>;
> > +                   ti,hwmods = "lcdc";
> > +                   status = "disabled";
> > +           };
> >     };
> >  };
> 
> am335x-evm.dts includes am33xx.dtsi, so you shouldn't need to provide
> all SoC-specific settings again in the board dts. The way it's done
> here, you get two nodes ("lcdc" and "lcdc@4830e000") for the same HW
> module.
> 
> It seems you just need status and maybe
> ti,allow-non-reduced-blanking-modes (for which I didn't see either the
> binding or the driver code yet).
> 

Thanks for the feedback. I did miss these cut-paste induced mistake.
I'll update the patch and resubmit.

> Regards,
> Jan
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to