Both buses are not used on the phyCARD-S module. This patch moves them
to the rdk file. Remove ioexpander.
Signed-off-by: Markus Pargmann <m...@pengutronix.de>
---
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 13 +++++++++++++
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 18 ------------------
2 files changed, 13 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 390d8f2..0514b0a 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -41,6 +41,19 @@
status = "okay";
};
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&owire {
+ status = "okay";
+};
+
&sdhci2 {
cd-gpios = <&gpio3 29 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
index cdff8c7..c8d57d1 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
@@ -33,20 +33,6 @@
status = "okay";
};
-&i2c1 {
- status = "okay";
-
- ioexpander@41 {
- compatible = "nxp,pca9536";
- reg = <0x41>;
- };
-
- rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
&i2c2 {
status = "okay";
@@ -56,7 +42,3 @@
reg = <0x52>;
};
};
-
-&owire {
- status = "okay";
-};
--
1.8.2.1
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
