The i.MX53 PWM controller uses two cells to describe the PWM specifier.
Remove the extra unused values from the backlight DT node pwms property.

Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
---
 arch/arm/boot/dts/imx53-mba53.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts 
b/arch/arm/boot/dts/imx53-mba53.dts
index aaa33bc..a630902 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -27,7 +27,7 @@
 
        backlight {
                compatible = "pwm-backlight";
-               pwms = <&pwm2 0 50000 0 0>;
+               pwms = <&pwm2 0 50000>;
                brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 
76 80 84 88 92 96 100>;
                default-brightness-level = <10>;
                enable-gpios = <&gpio7 7 0>;
-- 
1.8.1.5

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to