On Wed, Jul 10, 2013 at 6:23 PM, Florian Fainelli <flor...@openwrt.org> wrote:
> Hello Thomas,
>
> 2013/7/10 Thomas Petazzoni <thomas.petazz...@free-electrons.com>:
>> Dear Florian Fainelli,
>>
>> On Wed, 10 Jul 2013 17:29:44 +0100, Florian Fainelli wrote:
> [snip]
>
>>
>>> > };
>>> >
>>> > phy1: ethernet-phy@1 {
>>> > ... all the properties you listed ...
>>> > ... maybe the "id" property is not needed
>>> > because of the phandle ...
>>> > };
>>> > };
>>> >
>>> > soc {
>>> > ethernet@0 {
>>> > phy = <&phy0>;
>>> > ...
>>> > };
>>> >
>>> > ethernet@1 {
>>> > phy = <&phy1>;
>>> > ...
>>> > };
>>> > };
>>> >
>>> > or do you have in mind another representation?
>>>
>>> Not really this is more or less what I had in mind. I am wondering
>>> whether we should really declare the "mdio-fixed" node, or if we
>>> should not rather make the following:
>>>
>>> - declare all PHY nodes in the system as sub nodes of their belonging
>>> real hardware MDIO bus node
>>> - flag specific PHY nodes as "fixed" with a "fixed-link" boolean for
>>> instance
>>> - if we see that flag, make that specific PHY node bind to the
>>> fixed-phy driver instead
>>
>> So the fixed PHY driver is going to travel through *all* nodes of the
>> DT, and whenever some random node has a "fixed" property, it's going to
>> say it corresponds to a fixed PHY? That doesn't seem like a good idea.
>
> Why not? Since we are already have to scan the entire MDIO bus we are
> attached to, when we encounter such a PHY node with the special
> "fixed" properties, we just call fixed_phy_add() with the right
> parameters and voila. Which is also the reason why I was suggesting to
> put the "fixed" PHY nodes as sub-nodes of the real MDIO node such that
> we have this logic only in one place.
Hi Florian,
I think this discussion is going in the wrong direction. The concept
of a dummy phy is really a Linux kernel internal detail. Creating some
kind of dummy MDIO bus node does not describe the hardware. There is
already support in the kernel for Ethernet MACs connected directly to
a switch or other device. It is far better to describe how the MAC
needs to be configured than to invent a non-existent phy. Search for
"fixed-link" in the kernel tree to see how it is used.
g.
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
