* Andrey Konovalov <[email protected]> [131011 12:42]: > Commit 851320e (ARM: dts: Fix muxing and regulator for wl12xx on the > SDIO bus for pandaboard) put the wl12xx pins into omap4_pmx_wkup. This > is not correct, and results in the following messages at the boot time: > > pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) > pinctrl-single 4a31e040.pinmux: could not add functions for > pinmux_wl12xx_pins 56x > > Actually these pins belong to omap4_pmx_core.
Oops indeed. I wonder how that happened.. Acked-by: Tony Lindgren <[email protected]> > Signed-off-by: Andrey Konovalov <[email protected]> > --- > arch/arm/boot/dts/omap4-panda-common.dtsi | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi > b/arch/arm/boot/dts/omap4-panda-common.dtsi > index 814ab67..712ddbf 100644 > --- a/arch/arm/boot/dts/omap4-panda-common.dtsi > +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi > @@ -239,15 +239,6 @@ > 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ > >; > }; > -}; > - > -&omap4_pmx_wkup { > - led_wkgpio_pins: pinmux_leds_wkpins { > - pinctrl-single,pins = < > - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ > - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ > - >; > - }; > > /* > * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP > @@ -277,6 +268,16 @@ > }; > }; > > +&omap4_pmx_wkup { > + led_wkgpio_pins: pinmux_leds_wkpins { > + pinctrl-single,pins = < > + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ > + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ > + >; > + }; > + > +}; > + > &i2c1 { > pinctrl-names = "default"; > pinctrl-0 = <&i2c1_pins>; > -- 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
