Hello all,
Thank you for your advices. I have revised v5 revision.
This patch is the sixth revision for Capella CM36651 proximity and RGB light
sensor driver.
It also support detection proximity event.
This driver supports:
- Event: rising and falling proximity events.
- Reading channel through read_raw_callback.
- Writing sensor data integration time each channel through write_raw
callback.
v6 changed below
- Remove enable/disable_irq APIs.
- Add some macros.
- Code cleanup
*** BLURB HERE ***
Beomho Seo (2):
DT: Add documentation for cm36651 proximity/light sensor
iio: cm36651: Add CM36651 proximity/light sensor
.../devicetree/bindings/iio/light/cm36651.txt | 26 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/cm36651.c | 722 ++++++++++++++++++++
4 files changed, 760 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
create mode 100644 drivers/iio/light/cm36651.c
--
1.7.9.5
--
Best Regards,
Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
