On 10/13/2013 3:19 PM, Eduardo Valentin wrote:
On 27-09-2013 18:37, Wendy Ng wrote:
This patch adds the device tree node for Broadcom bcm281xx SoCs thermal
driver.
Signed-off-by: Wendy Ng <[email protected]>
Reviewed-by: Markus Mayer <[email protected]>
Reviewed-by: Christian Daudt <[email protected]>
---
arch/arm/boot/dts/bcm11351-brt.dts | 4 +++-
arch/arm/boot/dts/bcm11351.dtsi | 6 ++++++
arch/arm/boot/dts/bcm28155-ap.dts | 4 ++++
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts
b/arch/arm/boot/dts/bcm11351-brt.dts
index 9d36eb4..0771b6b 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -43,5 +43,7 @@
status = "okay";
};
-
+ thermal@34008000 {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 05a5aab..aa13353 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -96,4 +96,10 @@
status = "disabled";
};
+ thermal@34008000 {
+ compatible = "brcm,bcm11351-thermal", "brcm,kona-thermal";
+ reg = <0x34008000 0x0024>;
+ thermal-name = "bcm_kona_therm";
As I mentioned previously, my only concern is this thermal binding,
which is specific to your driver (BTW, you would need to do
bcm,thermal-name)
Hi Eduardo,
I have a local working copy of the thermal driver that does not use the
'thermal-name' from this DTS file. It has been re-based to your working
version of the new thermal DT binding.
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts
b/arch/arm/boot/dts/bcm28155-ap.dts
index 96ae67a..a39aa47 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -42,4 +42,8 @@
max-frequency = <48000000>;
status = "okay";
};
+
+ thermal@34008000 {
+ status = "okay";
+ };
};
--
Best regards,
-Wendy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
