Add auart2 pins configuration on its main pads
Signed-off-by: Aida Mynzhasova <[email protected]>
---
arch/arm/boot/dts/imx28.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 918d419..cab4c22 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -343,6 +343,19 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ auart2_pins_a: auart2-pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ MX28_PAD_AUART2_CTS__AUART2_CTS
+ MX28_PAD_AUART2_RTS__AUART2_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
