Add RX51_LCD_RESET_GPIO pin mux information to
display.
Signed-off-by: Sebastian Reichel <[email protected]>
---
arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 999a80c..5afbd28 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -124,6 +124,12 @@
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3
*/
>;
};
+
+ display_pins: pinmux_display_pins {
+ pinctrl-single,pins = <
+ 0x0d4 (PIN_OUTPUT | MUX_MODE4) /*
RX51_LCD_RESET_GPIO */
+ >;
+ };
};
&i2c1 {
@@ -361,6 +367,9 @@
compatible = "acx565akm";
spi-max-frequency = <6000000>;
reg = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_pins>;
};
};
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
