On 10/21/2013 08:06 AM, Shawn Guo wrote:
On Tue, Oct 15, 2013 at 05:49:24PM +0300, Valentin Raevsky wrote:
Add initial support for cm-fx6 module.
cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIE
This patch allows to boot up the module, configures the serial console,
the Ethernet adapter and the hearbeat led.
Signed-off-by: Valentin Raevsky <[email protected]>
Acked-by: Igor Grinberg <[email protected]>
---
arch/arm/boot/dts/cm-fx6.dts | 51 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 arch/arm/boot/dts/cm-fx6.dts
Please name the file with 'imx6q-' prefix, and add dtb target into
arch/arm/boot/dts/Makefile.
thatnks, got it. will be in v2.
diff --git a/arch/arm/boot/dts/cm-fx6.dts b/arch/arm/boot/dts/cm-fx6.dts
new file mode 100644
index 0000000..1080215
--- /dev/null
+++ b/arch/arm/boot/dts/cm-fx6.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+ model = "CompuLab CM-FX6";
+ compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 31 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ status = "okay";
+};
+
+&fec {
Please sort the nodes alphabetically in label names.
got it. will be in v2.
Shawn
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+};
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
