On Oct 28, 2013, at 4:00 AM, Markus Pargmann wrote:
> imx27 pincontrol driver using the imx1 core driver. The DT bindings are
> similar to other imx pincontrol drivers.
>
> Signed-off-by: Markus Pargmann <[email protected]>
> Acked-by: Sascha Hauer <[email protected]>
> Acked-by: Shawn Guo <[email protected]>
> ---
> .../bindings/pinctrl/fsl,imx27-pinctrl.txt | 89 ++++
> drivers/pinctrl/Kconfig | 8 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/pinctrl-imx27.c | 477 +++++++++++++++++++++
> 4 files changed, 575 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> create mode 100644 drivers/pinctrl/pinctrl-imx27.c
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> new file mode 100644
> index 0000000..32c81c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> @@ -0,0 +1,89 @@
> +* Freescale IMX27 IOMUX Controller
> +
> +Required properties:
> +- compatible: "fsl,imx27-iomuxc"
> +
> +The iomuxc driver node should define subnodes containing of pinctrl
> configuration subnodes.
Here would probably be a good point to reference "pinctrl/pinctrl-bindings.txt"
> +
> +Required properties for pin configuration node:
> +- fsl,pins: three integers array, represents a group of pins mux and config
> + setting. The format is fsl,pins = <PIN MUX_ID CONFIG>.
> +
> + PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32
> configurable
> + configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
> + number on the specific port (between 0 and 31).
I might be coming late to this, so feel free to ignore if this has already been
discussed.
Why not encode PORT in fsl,pins so it would be <PORT PORT_PIN MUX_ID CONFIG> ?
> +
> + MUX_ID is
> + function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) +
> (gpio_iconfb << 10)
> +
> + function: 0 - Primary function
> + 1 - Alternate function
> + 2 - GPIO
> + Registers GIUS (GPIO In Use) and GPR (General Purpose Register)
> +
> + direction: 0 - Input
> + 1 - Output
> + Register DDIR
> +
> + gpio_oconf: 0 - A_IN
> + 1 - B_IN
> + 2 - C_IN
> + 3 - Data Register
what does this mean?
> + Registers OCR1 and OCR2
> +
> + gpio_iconfa/b: 0 - GPIO_IN
> + 1 - Interrupt Status Register
> + 2 - 0
> + 3 - 1
What does any of these option mean (especially 2 & 3)?
> + Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2
> +
> +
Someone should be able to reasonable read this and determine how to set MUX_ID
w/o having to reference the HW manual.
> + CONFIG can be 0 or 1, meaning Pullup disable/enable.
just for clarity do:
CONFIG: 0 - Pullup disabled
1 - Pullup enabled
> +
> +
> +
> +
> +Example:
> +
> +iomuxc: iomuxc@10015000 {
> + compatible = "fsl,imx27-iomuxc";
> + reg = <0x10015000 0x600>;
> +
> + uart {
> + pinctrl_uart1: uart-1 {
> + fsl,pins = <
> + 0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */
> + 0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */
> + 0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */
> + 0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */
> + >;
> + };
> +
> + ...
> + };
> +};
> +
> +
> +For convenience there are macros defined in imx27-pinfunc.h which provide PIN
> +and MUX_ID. They are structured as MX27_PAD_<Pad name>__<Signal name>. The
> names
> +are defined in the i.MX27 reference manual.
> +
> +The above example using macros:
> +
> +iomuxc: iomuxc@10015000 {
> + compatible = "fsl,imx27-iomuxc";
> + reg = <0x10015000 0x600>;
> +
> + uart {
> + pinctrl_uart1: uart-1 {
> + fsl,pins = <
> + MX27_PAD_UART1_TXD__UART1_TXD 0x0
> + MX27_PAD_UART1_RXD__UART1_RXD 0x0
> + MX27_PAD_UART1_CTS__UART1_CTS 0x0
> + MX27_PAD_UART1_RTS__UART1_RTS 0x0
> + >;
> + };
> +
> + ...
> + };
> +};
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by
The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
