On Tue, Nov 05, 2013 at 03:39:11PM +0100, Denis Carikli wrote: > This is mostly cut and paste from the imx35 pinctrl driver. > The data was generated using sed and awk on > arch/arm/plat-mxc/include/mach/iomux-mx25.h. > > Cc: Rob Herring <[email protected]> > Cc: Pawel Moll <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: Stephen Warren <[email protected]> > Cc: Ian Campbell <[email protected]> > Cc: [email protected] > Cc: Sascha Hauer <[email protected]> > Cc: [email protected] > Cc: Russell King <[email protected]> > Cc: Linus Walleij <[email protected]> > Cc: Eric Bénard <[email protected]> > Signed-off-by: Denis Carikli <[email protected]> > Acked-by: Sascha Hauer <[email protected]> > --- > ChangeLog v9->v10: > - Added a imx25-pingrp.h header. > - Removed backslash-newline at end of imx25-pingrp.h > > ChangeLog v8->v9: > - Whitespace cleanup betwen the CC: and Signed-off-by. > - Kconfig: rebased to make it apply on the new HEAD. > --- > .../bindings/pinctrl/fsl,imx25-pinctrl.txt | 25 + > arch/arm/boot/dts/imx25-pinfunc.h | 494 > ++++++++++++++++++++ > arch/arm/boot/dts/imx25-pingrp.h | 79 ++++ > arch/arm/boot/dts/imx25.dtsi | 1 + > drivers/pinctrl/Kconfig | 9 + > drivers/pinctrl/Makefile | 1 + > drivers/pinctrl/pinctrl-imx25.c | 351 ++++++++++++++ > 7 files changed, 960 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h > create mode 100644 arch/arm/boot/dts/imx25-pingrp.h > create mode 100644 drivers/pinctrl/pinctrl-imx25.c > > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > new file mode 100644 > index 0000000..1d6dae2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > @@ -0,0 +1,25 @@ > +* Freescale IMX25 IOMUX Controller > + > +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part > +and usage. > + > +CONFIG bits definition: > +PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13) > +PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13) > +PAD_CTL_HYS (1 << 8) > +PAD_CTL_PKE (1 << 7) > +PAD_CTL_PUE (1 << 6) > +PAD_CTL_PUS_100K_DOWN (0 << 4) > +PAD_CTL_PUS_47K_UP (1 << 4) > +PAD_CTL_PUS_100K_UP (2 << 4) > +PAD_CTL_PUS_22K_UP (3 << 4) > +PAD_CTL_ODE_CMOS (0 << 3) > +PAD_CTL_ODE_OPENDRAIN (1 << 3) > +PAD_CTL_DSE_NOMINAL (0 << 1) > +PAD_CTL_DSE_HIGH (1 << 1) > +PAD_CTL_DSE_MAX (2 << 1) > +PAD_CTL_SRE_FAST (1 << 0) > +PAD_CTL_SRE_SLOW (0 << 0)
You removed the group control registers in v11? Are these config bits used for other pinctl registers? Especially "DRIVE_VOLTAGE" seems to be only for those registers you removed. Regards Markus Pargmann -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
