On Nov 12, 2013, at 10:22 AM, Sebastian Andrzej Siewior <[email protected]> wrote:
> The document says "first four bits" and means the upper nibble. Most > people would probably agree that the first four bits are bits 0…3 and > that is the lower nibble. > This patch updates the documentation so it is clear what is meant. > > Signed-off-by: Sebastian Andrzej Siewior <[email protected]> > --- > Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > index 491c97b..0fcd430 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > @@ -17,8 +17,8 @@ > remaining 4 can be used by the ADC. > ti,wire-config: Different boards could have a different order for > connecting wires on touchscreen. We need to provide an > - 8 bit number where in the 1st four bits represent the > - analog lines and the next 4 bits represent positive/ > + 8 bit number where the upper nibble represent the > + analog lines and the lower nibble represent positive/ > negative terminal on that input line. Notations to > represent the input lines and terminals resoectively > is as follows: Is it possible to give an example because that might help with the confusion. - k > -- > 1.8.4.2 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
