I doubt that there are many people using 2430 sdp, but as that's been historically an important acid test platform for omap2+ related changes, let's add minimal device tree support for it.
If anybody is using it beyond minimal boot testing, patches for more complete device tree support are welcome. Cc: [email protected] Cc: "Benoît Cousson" <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap2430-sdp.dts | 49 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 arch/arm/boot/dts/omap2430-sdp.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a6..73022b1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap2430-sdp.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-devkit8000.dtb \ diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts new file mode 100644 index 0000000..2c90d29 --- /dev/null +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap2430.dtsi" + +/ { + model = "TI OMAP2430 SDP"; + compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; +}; + +&i2c2 { + clock-frequency = <100000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + }; +}; + +#include "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +&gpmc { + ranges = <5 0 0x08000000 0x01000000>; + ethernet@gpmc { + compatible = "smsc,lan91c94"; + interrupt-parent = <&gpio5>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */ + reg = <5 0x300 0xf>; + bank-width = <2>; + gpmc,mux-add-data; + }; +}; + -- 1.8.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
