This moves the Snowball LED pin config to the device tree.
Signed-off-by: Linus Walleij <[email protected]>
---
arch/arm/boot/dts/ste-snowball.dts | 11 +++++++++++
arch/arm/mach-ux500/board-mop500-pins.c | 2 --
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-snowball.dts
b/arch/arm/boot/dts/ste-snowball.dts
index 744ab956059a..605188ba30cd 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -76,6 +76,8 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioled_snowball_mode>;
used-led {
label = "user_led";
gpios = <&gpio4 14 0x4>;
@@ -414,6 +416,15 @@
};
};
+ gpio_led {
+ gpioled_snowball_mode: gpioled_default {
+ snowball_cfg1 {
+ ste,pins = "GPIO142_C11";
+ ste,config = <&gpio_out_hi>;
+ };
+
+ };
+ };
};
mcde@a0350000 {
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c
b/arch/arm/mach-ux500/board-mop500-pins.c
index 0e5d2684bc9a..aae9cfcfd56a 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -297,8 +297,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
};
static struct pinctrl_map __initdata snowball_pinmap[] = {
- /* User LED */
- DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
/* Accelerometer/Magnetometer */
DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
