Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...).
Signed-off-by: Arnaud Ebalard <[email protected]> --- Hi, I have prepared some cleanup patches for existing ReadyNAS .dts files which I intend to send for review in the next fex days. The GPIO voltage level is still a value below but the cleanup patch for this .dts will handle that globally. arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index e6a102c..4e3cae1 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -60,6 +60,10 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; }; clocks { @@ -158,6 +162,13 @@ }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 1>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
