Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...).
Signed-off-by: Arnaud Ebalard <[email protected]> --- Changes since v1: - use macro instead of value for GPIO voltage level arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index e6a102c..551bfed 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "kirkwood.dtsi" #include "kirkwood-6282.dtsi" @@ -60,6 +61,10 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; }; clocks { @@ -158,6 +163,13 @@ }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; -- 1.8.4.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
