This patch provides top level functionality for the DT clock initialization.
Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM)
going down towards individual clock nodes, and finally initializing
clockdomains once all the clocks are ready.

Signed-off-by: Tero Kristo <[email protected]>
---
 arch/arm/mach-omap2/Kconfig      |    1 +
 arch/arm/mach-omap2/clock.h      |    2 +
 arch/arm/mach-omap2/prm.h        |    1 +
 arch/arm/mach-omap2/prm_common.c |  128 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 132 insertions(+)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dc21df1..4fccbbe 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
        select SPARSE_IRQ
        select TI_PRIV_EDMA
        select USE_OF
+       select REGMAP_MMIO
        help
          Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9595d72..10efab8 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -291,6 +291,8 @@ extern const struct clksel_rate div_1_3_rates[];
 extern const struct clksel_rate div_1_4_rates[];
 extern const struct clksel_rate div31_1to31_rates[];
 
+extern struct regmap *clk_regmaps[];
+
 extern int am33xx_clk_init(void);
 
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ac25ae6..623db40 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,6 +18,7 @@
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
 extern void omap2_set_globals_prm(void __iomem *prm);
+int of_prcm_init(void);
 # endif
 
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index a2e1174..16ab63c 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -23,6 +23,12 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
 
 #include "soc.h"
 #include "prm2xxx_3xxx.h"
@@ -30,6 +36,7 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 #include "common.h"
+#include "clock.h"
 
 /*
  * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -464,3 +471,124 @@ int prm_unregister(struct prm_ll_data *pld)
 
        return 0;
 }
+
+static struct of_device_id omap_prcm_dt_match_table[] = {
+       { .compatible = "ti,clock-master" },
+       { }
+};
+
+static struct regmap_config ti_clk_regmap_config = {
+       .reg_bits = 32,
+       .reg_stride = 4,
+       .val_bits = 32,
+       .cache_type = REGCACHE_NONE,
+};
+
+static LIST_HEAD(prcm_early_devs);
+
+struct prcm_early_dev {
+       struct device_node *node;
+       struct platform_device *dev;
+       struct list_head link;
+};
+
+static struct clk_hw_omap regmap_dummy_ck = {
+       .flags = REGMAP_ADDRESSING,
+};
+
+static u32 prm_clk_readl(u32 *reg)
+{
+       return omap2_clk_readl(&regmap_dummy_ck, reg);
+}
+
+static void prm_clk_writel(u32 val, u32 *reg)
+{
+       omap2_clk_writel(val, &regmap_dummy_ck, reg);
+}
+
+static struct clk_reg_ops omap_clk_reg_ops = {
+       .clk_readl = prm_clk_readl,
+       .clk_writel = prm_clk_writel,
+};
+
+int __init of_prcm_init(void)
+{
+       struct device_node *np;
+       void __iomem *mem;
+       struct regmap *regmap;
+       struct platform_device *pdev;
+       struct prcm_early_dev *edev;
+       int regmap_index = 0;
+
+       clk_register_reg_ops(&omap_clk_reg_ops);
+
+       for_each_matching_node(np, omap_prcm_dt_match_table) {
+               pdev = platform_device_alloc(np->name, 0);
+               dev_set_name(&pdev->dev, "%s", pdev->name);
+               edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+               edev->dev = pdev;
+               edev->node = np;
+               list_add(&edev->link, &prcm_early_devs);
+               mem = of_iomap(np, 0);
+               ti_clk_regmap_config.name = "0";
+               regmap = regmap_init_mmio(&pdev->dev, mem,
+                                         &ti_clk_regmap_config);
+               clk_regmaps[regmap_index] = regmap;
+               ti_dt_clk_init_provider(np, regmap_index);
+               regmap_index++;
+       }
+
+       ti_dt_clockdomains_setup();
+
+       return 0;
+}
+
+static int prcm_probe(struct platform_device *pdev)
+{
+       const struct of_device_id *of_id =
+               of_match_device(omap_prcm_dt_match_table, &pdev->dev);
+       struct prcm_early_dev *edev;
+       int ret;
+
+       if (!of_id)
+               return 0;
+
+       list_for_each_entry(edev, &prcm_early_devs, link) {
+               if (edev->node == pdev->dev.of_node) {
+                       platform_device_add(edev->dev);
+                       edev->dev->dev.driver = pdev->dev.driver;
+                       ret = device_bind_driver(&edev->dev->dev);
+                       if (ret)
+                               return ret;
+               }
+       }
+
+       return 0;
+}
+
+static int prcm_remove(struct platform_device *pdev)
+{
+       return 0;
+}
+
+static struct platform_driver prcm_driver = {
+       .probe          = prcm_probe,
+       .remove         = prcm_remove,
+       .driver         = {
+               .name   = "prcm-driver",
+               .owner  = THIS_MODULE,
+               .of_match_table = of_match_ptr(omap_prcm_dt_match_table),
+       },
+};
+
+static __init int prcm_init(void)
+{
+       return platform_driver_register(&prcm_driver);
+}
+
+static __exit void prcm_exit(void)
+{
+       platform_driver_unregister(&prcm_driver);
+}
+omap_postcore_initcall(prcm_init);
+module_exit(prcm_exit);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to