Hello.
On 26-11-2013 9:46, Loc Ho wrote:
arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
As I already said, there's no need to repeat the patch summary line (the
mail subject) in the changelog verbatim.
This patch adds the DTS entries for the APM X-Gene SoC 15Gbps Multi-purpose
PHY driver. The PHY for SATA controller 0 and 1 are enabled by default.
Signed-off-by: Loc Ho <[email protected]>
Signed-off-by: Tuan Phan <[email protected]>
Signed-off-by: Suman Tripathi <[email protected]>
---
arch/arm64/boot/dts/apm-storm.dtsi | 31 +++++++++++++++++++++++++++++++
1 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi
b/arch/arm64/boot/dts/apm-storm.dtsi
index 359d7b6..f74c26a 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -193,5 +193,36 @@
reg = <0x0 0x17000014 0x0 0x100>;
mask = <0x1>;
};
+
+ phy1: phy@1f210000 {
Shouldn't the address part of the node name correspond to the first
address specifier in the "reg" prop?
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f21a000 0x0 0x100>,
+ <0x0 0x1f21c000 0x0 0x100>;
+ #phy-cells = <1>;
+ status = "disabled";
+ apm-tx-boost-gain = <0x2 0x2 0x2 0x2 0x2 0x2>;
+ apm-tx-eye-tuning = <0xa 0xa 0xa 0xa 0xa 0xa>;
The vendor name should be separated by comma in the vendor specific prop
names.
+ };
Same comments about the other 2 PHY nodes.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
