fix a typo in the "clock specifiers" discussion, clarify that clock specifiers (the integer cells part that goes with the phandle) may be empty
Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Ian Campbell <[email protected]> Cc: [email protected] Signed-off-by: Gerhard Sittig <[email protected]> --- this may sound like nit picking, but from an earlier explanation by Mark Rutland I learned that a reference always consists of a phandle and a specifier, that the specifier is the sequence of integer cells that accompany the phandle, and that the phandle "by intuition might be expected to" be part of the specifier but specificly is not (and shall not, to keep the existing documentation consistent) since I was fixing the typo, and had the above information, I could not resist but had to add the "may be zero cells" detail in bypassing found no other issue in this file -- don't worry, won't emit an endless stream of tiny trivial changes, this one is all there is :) Documentation/devicetree/bindings/clock/clock-bindings.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index eb65d417f8c4..7c52c29d99fa 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -5,7 +5,7 @@ Sources of clock signal can be represented by any node in the device tree. Those nodes are designated as clock providers. Clock consumer nodes use a phandle and clock specifier pair to connect clock provider outputs to clock inputs. Similar to the gpio specifiers, a clock -specifier is an array of one more more cells identifying the clock +specifier is an array of zero, one or more cells identifying the clock output on a device. The length of a clock specifier is defined by the value of a #clock-cells property in the clock provider node. -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
