On Tue, Dec 03, 2013 at 12:10:15PM +0100, Gwenhael Goavec-Merou wrote:
> Signed-off-by: Gwenhael Goavec-Merou <[email protected]>
>
> - add chip-select pinctrl for cspi
> - add card-detect for sdhci2
> - add pinctrl for gpio-leds and gpio-keys
I put these lines before your SoB.
Shawn
>
> ---
> Changelog:
> v3:
> * use short subject and add commit log
>
> arch/arm/boot/dts/imx27-apf27dev.dts | 34 +++++++++++++++++++++++++++++++---
> 1 file changed, 31 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts
> b/arch/arm/boot/dts/imx27-apf27dev.dts
> index a794b1a..17dd206 100644
> --- a/arch/arm/boot/dts/imx27-apf27dev.dts
> +++ b/arch/arm/boot/dts/imx27-apf27dev.dts
> @@ -38,6 +38,8 @@
>
> gpio-keys {
> compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_keys>;
>
> user-key {
> label = "user";
> @@ -48,6 +50,8 @@
>
> leds {
> compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
>
> user {
> label = "Heartbeat";
> @@ -61,7 +65,7 @@
> fsl,spi-num-chipselects = <1>;
> cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_cspi1>;
> + pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
> status = "okay";
> };
>
> @@ -71,7 +75,7 @@
> <&gpio4 27 GPIO_ACTIVE_LOW>,
> <&gpio2 17 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_cspi2>;
> + pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
> status = "okay";
> };
>
> @@ -107,10 +111,30 @@
> fsl,pins = <MX27_CSPI1_PINGRP1>;
> };
>
> + pinctrl_cspi1_cs: cspi1csgrp {
> + fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
> + };
> +
> pinctrl_cspi2: cspi2grp {
> fsl,pins = <MX27_CSPI2_PINGRP1>;
> };
>
> + pinctrl_cspi2_cs: cspi2csgrp {
> + fsl,pins = <
> + MX27_PAD_CSI_D5__GPIO2_17 0x0
> + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
> + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledsgrp {
> + fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
> + };
> +
> + pinctrl_gpio_keys: gpiokeysgrp {
> + fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
> + };
> +
> pinctrl_imxfb1: imxfbgrp {
> fsl,pins = <MX27_FB_PINGRP1>;
> };
> @@ -130,6 +154,10 @@
> pinctrl_sdhc2: sdhc2grp {
> fsl,pins = <MX27_SDHC2_PINGRP1>;
> };
> +
> + pinctrl_sdhc2_cd: sdhc2cdgrp {
> + fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
> + };
> };
> };
>
> @@ -137,7 +165,7 @@
> bus-width = <4>;
> cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_sdhc2>;
> + pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
> status = "okay";
> };
>
> --
> 1.8.3.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
