Hi Tomi,
On Wed, Dec 4, 2013 at 1:28 PM, Tomi Valkeinen <[email protected]> wrote:
> Signed-off-by: Tomi Valkeinen <[email protected]>
> ---
> arch/arm/boot/dts/omap4-panda-common.dtsi | 102
> ++++++++++++++++++++++++++++++
> 1 file changed, 102 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi
> b/arch/arm/boot/dts/omap4-panda-common.dtsi
> index 298e85020e1b..51a79756e67e 100644
> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
> @@ -409,3 +409,105 @@
> &usbhsehci {
> phys = <&hsusb1_phy>;
> };
> +
> +&dpi {
> + dpi_out: endpoint {
> + remote-endpoint = <&tfp410_in>;
> + data-lines = <24>;
> + };
> +};
> +
> +&dsi1 {
> + vdds_dsi-supply = <&vcxio>;
> +};
> +
> +&dsi2 {
> + vdds_dsi-supply = <&vcxio>;
> +};
> +
> +&hdmi {
> + vdda_hdmi_dac-supply = <&vdac>;
> +
> + hdmi_out: endpoint {
> + remote-endpoint = <&tpd12s015_in>;
> + };
> +};
> +
> +/ {
> + aliases {
> + display0 = &dvi0;
> + display1 = &hdmi0;
> + };
> +
> + tfp410: encoder@0 {
> + compatible = "ti,tfp410";
> + gpios = <&gpio1 0 0>; /* 0, power-down */
> +
Please use the constants from include/dt-bindings/ instead of magic
numbers, i.e:
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* 0, power-down */
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + tfp410_in: endpoint@0 {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + tfp410_out: endpoint@1 {
> + remote-endpoint = <&dvi_connector_in>;
> + };
> + };
> + };
> + };
> +
> + dvi0: connector@0 {
> + compatible = "ti,dvi-connector";
> + i2c-bus = <&i2c3>;
> +
> + dvi_connector_in: endpoint {
> + remote-endpoint = <&tfp410_out>;
> + };
> + };
> +
> + tpd12s015: encoder@1 {
> + compatible = "ti,tpd12s015";
> +
> + gpios = <&gpio2 28 0>, /* 60, CT CP HPD */
> + <&gpio2 9 0>, /* 41, LS OE */
> + <&gpio2 31 0>; /* 63, HPD */
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + tpd12s015_in: endpoint@0 {
> + remote-endpoint = <&hdmi_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + tpd12s015_out: endpoint@1 {
> + remote-endpoint =
> <&hdmi_connector_in>;
> + };
> + };
> + };
> + };
> +
> + hdmi0: connector@1 {
> + compatible = "ti,hdmi-connector";
> +
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&tpd12s015_out>;
> + };
> + };
> +};
> --
> 1.8.3.2
>
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
