On Tue, 17 Dec 2013, Krzysztof Kozlowski wrote: > Add support for GPIO control (enable/disable) over Buck9. The Buck9 > Converter is used as a supply for eMMC Host Controller. > > BUCK9EN GPIO of S5M8767 chip may be used by application processor to > enable or disable the Buck9. This has two benefits: > - It is faster than toggling it over I2C bus. > - It allows disabling the regulator during suspend to RAM; The AP will > enable it during resume; Without the patch the regulator supplying > eMMC must be defined as fixed-regulator. > > Signed-off-by: Krzysztof Kozlowski <[email protected]> > Cc: Kyungmin Park <[email protected]> > Cc: Marek Szyprowski <[email protected]> > --- > drivers/regulator/s5m8767.c | 120 > ++++++++++++++++++++++++++++++++++- > include/linux/mfd/samsung/core.h | 2 + > include/linux/mfd/samsung/s5m8767.h | 7 ++
So long as they fit in with the rest of the changes, the MFD adaptions look fine to me: Acked-by: Lee Jones <[email protected]> -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
