Hi Folks
Sorry, forgot the --subject. This is version 3 of the patchset.
Andrew
On Tue, Dec 17, 2013 at 09:21:49PM +0100, Andrew Lunn wrote:
> Describe the binding for the Marvell MVEBU SATA phy. This driver
> can be used at least with Kirkwood, Dove and maybe others.
> Additionally, update the SATA binding with the properties to link
> to the phy nodes.
>
> Signed-off-by: Andrew Lunn <[email protected]>
> ---
> v1->v2:
> Correct #phy-cells
> Correct number after @ to match first reg address.
> Rename to phy-mvebu.txt
>
> v2->v3:
> Renamed to mvebu-phy.txt
> Use "port0", "port1" instead of "0", "1"
> ---
> Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++
> .../devicetree/bindings/phy/mvebu-phy.txt | 22
> ++++++++++++++++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/mvebu-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/marvell.txt
> b/Documentation/devicetree/bindings/ata/marvell.txt
> index b5cdd20cde9c..4c5447f1068d 100644
> --- a/Documentation/devicetree/bindings/ata/marvell.txt
> +++ b/Documentation/devicetree/bindings/ata/marvell.txt
> @@ -6,11 +6,17 @@ Required Properties:
> - interrupts : Interrupt controller is using
> - nr-ports : Number of SATA ports in use.
>
> +Optional Properties:
> +- phys : List of phandles to sata phys
> +- phy-names : Should be "port0", "port1", etc, one per phandle
> +
> Example:
>
> sata@80000 {
> compatible = "marvell,orion-sata";
> reg = <0x80000 0x5000>;
> interrupts = <21>;
> + phys = <&sata_phy0>, <&sata_phy1>;
> + phy-names = "port0", "port1";
> nr-ports = <2>;
> }
> diff --git a/Documentation/devicetree/bindings/phy/mvebu-phy.txt
> b/Documentation/devicetree/bindings/phy/mvebu-phy.txt
> new file mode 100644
> index 000000000000..6cb3364aeafb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mvebu-phy.txt
> @@ -0,0 +1,22 @@
> +* Marvell MVEBU SATA PHY
> +
> +Power control for the SATA phy found on Marvell MVEBU SoCs.
> +
> +This document extends the binding described in phy-bindings.txt
> +
> +Required properties :
> +
> + - reg : Offset and length of the register set for the SATA
> device
> + - compatible : Should be "marvell,mvebu-sata-phy"
> + - clocks : phandle of clock and specifier that supplies the device
> + - clock-names : Should be "sata"
> +
> +Example:
> + sata-phy@84000 {
> + compatible = "marvell,mvebu-sata-phy";
> + reg = <0x84000 0x0334>;
> + clocks = <&gate_clk 15>;
> + clock-names = "sata";
> + #phy-cells = <0>;
> + status = "ok";
> + };
> --
> 1.8.5.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
