On Wednesday 18 December 2013 01:51 AM, Andrew Lunn wrote: > Add nodes for the two SATA PHYs on kirkwood. > Add node for the one SATA PHY on Dove. > Add pHandles to the PHYs in the sata nodes. > > Signed-off-by: Andrew Lunn <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]> > --- > v1->v2: > sata_phy@... ->sata-phy@ > value after '@' matching the first address in the reg. > > v2->v3: > "0" -> "port0", etc. > kirkewood -> kirkwood > --- > arch/arm/boot/dts/dove.dtsi | 11 +++++++++++ > arch/arm/boot/dts/kirkwood-6281.dtsi | 2 ++ > arch/arm/boot/dts/kirkwood-6282.dtsi | 2 ++ > arch/arm/boot/dts/kirkwood.dtsi | 18 ++++++++++++++++++ > 4 files changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi > index 113a8bc7bee7..198d03625832 100644 > --- a/arch/arm/boot/dts/dove.dtsi > +++ b/arch/arm/boot/dts/dove.dtsi > @@ -490,10 +490,21 @@ > reg = <0xa0000 0x2400>; > interrupts = <62>; > clocks = <&gate_clk 3>; > + phys = <&sata_phy0>; > + phy-names = "port0"; > nr-ports = <1>; > status = "disabled"; > }; > > + sata_phy0: sata-phy@a2000 { > + compatible = "marvell,mvebu-sata-phy"; > + reg = <0xa2000 0x0334>; > + clocks = <&gate_clk 3>; > + clock-names = "sata"; > + #phy-cells = <0>; > + status = "ok"; > + }; > + > rtc: real-time-clock@d8500 { > compatible = "marvell,orion-rtc"; > reg = <0xd8500 0x20>; > diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi > b/arch/arm/boot/dts/kirkwood-6281.dtsi > index 650ef30e1856..18400e74e0de 100644 > --- a/arch/arm/boot/dts/kirkwood-6281.dtsi > +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi > @@ -89,6 +89,8 @@ > interrupts = <21>; > clocks = <&gate_clk 14>, <&gate_clk 15>; > clock-names = "0", "1"; > + phys = <&sata_phy0>, <&sata_phy1>; > + phy-names = "port0", "port1"; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi > b/arch/arm/boot/dts/kirkwood-6282.dtsi > index 3933a331ddc2..69c622bbbfb5 100644 > --- a/arch/arm/boot/dts/kirkwood-6282.dtsi > +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi > @@ -117,6 +117,8 @@ > interrupts = <21>; > clocks = <&gate_clk 14>, <&gate_clk 15>; > clock-names = "0", "1"; > + phys = <&sata_phy0>, <&sata_phy1>; > + phy-names = "port0", "port1"; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi > index 8b73c80f1dad..ee06951721c4 100644 > --- a/arch/arm/boot/dts/kirkwood.dtsi > +++ b/arch/arm/boot/dts/kirkwood.dtsi > @@ -282,5 +282,23 @@ > /* set phy-handle property in board file */ > }; > }; > + > + sata_phy0: sata-phy@82000 { > + compatible = "marvell,mvebu-sata-phy"; > + reg = <0x82000 0x0334>; > + clocks = <&gate_clk 14>; > + clock-names = "sata"; > + #phy-cells = <0>; > + status = "ok"; > + }; > + > + sata_phy1: sata-phy@84000 { > + compatible = "marvell,mvebu-sata-phy"; > + reg = <0x84000 0x0334>; > + clocks = <&gate_clk 15>; > + clock-names = "sata"; > + #phy-cells = <0>; > + status = "ok"; > + }; > }; > }; >
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
