Hi Kukjin, On Tuesday 10 of December 2013 06:27:27 Kukjin Kim wrote: > On 12/05/13 18:44, Sachin Kamat wrote: > > Added regulator entries to Exynos5420 SMDK board. > > > > Signed-off-by: Sachin Kamat<[email protected]> > > --- > > Changes since v1: > > Changed node name > > --- > > arch/arm/boot/dts/exynos5420-smdk5420.dts | 216 > > +++++++++++++++++++++++++++++ > > 1 file changed, 216 insertions(+) > > > > diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts > > b/arch/arm/boot/dts/exynos5420-smdk5420.dts > > index fb5a1e25c632..62e1ebe4e989 100644 > > --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > > +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > > @@ -120,4 +120,220 @@ > > reg =<0x50>; > > }; > > }; > > + > > + hsi2c_4: i2c@12CA0000 { > > + status = "okay"; > > + > > + s2mps11_pmic@66 { > > + compatible = "samsung,s2mps11-pmic"; > > + reg =<0x66>; > > + s2mps11,buck2-ramp-delay =<12>; > > + s2mps11,buck34-ramp-delay =<12>; > > + s2mps11,buck16-ramp-delay =<12>; > > + s2mps11,buck6-ramp-enable =<1>; > > + s2mps11,buck2-ramp-enable =<1>; > > + s2mps11,buck3-ramp-enable =<1>; > > + s2mps11,buck4-ramp-enable =<1>; > > + > > + s2mps11_osc: clocks { > > + #clock-cells =<1>; > > + clock-output-names = "s2mps11_ap", > > + "s2mps11_cp", "s2mps11_bt"; > > + }; > > + > > + regulators { > > + ldo1_reg: LDO1 { > > + regulator-name = "vdd_ldo1"; > > + regulator-min-microvolt =<1000000>; > > + regulator-max-microvolt =<1000000>; > > + regulator-always-on; > > + }; > > + > > + ldo3_reg: LDO3 { > > + regulator-name = "vdd_ldo3"; > > + regulator-min-microvolt =<1800000>; > > + regulator-max-microvolt =<1800000>; > > + regulator-always-on; > > + }; > > + > > + ldo5_reg: LDO5 { > > + regulator-name = "vdd_ldo5"; > > + regulator-min-microvolt =<1800000>; > > + regulator-max-microvolt =<1800000>; > > + regulator-always-on; > > + }; > > + > > + ldo6_reg: LDO6 { > > + regulator-name = "vdd_ldo6"; > > + regulator-min-microvolt =<1000000>; > > + regulator-max-microvolt =<1000000>; > > + regulator-always-on; > > + }; > > + > > + ldo7_reg: LDO7 { > > + regulator-name = "vdd_ldo7"; > > + regulator-min-microvolt =<1800000>; > > + regulator-max-microvolt =<1800000>; > > + regulator-always-on; > > + }; > > + > > + ldo8_reg: LDO8 { > > + regulator-name = "vdd_ldo8"; > > + regulator-min-microvolt =<1800000>; > > + regulator-max-microvolt =<1800000>; > > + regulator-always-on; > > + }; > > + > > + ldo9_reg: LDO9 { > > + regulator-name = "vdd_ldo9"; > > + regulator-min-microvolt =<3000000>; > > + regulator-max-microvolt =<3000000>; > > + regulator-always-on; > > + }; > > + > > + ldo10_reg: LDO10 { > > + regulator-name = "vdd_ldo10"; > > + regulator-min-microvolt =<1800000>; > > + regulator-max-microvolt =<1800000>; > > + regulator-always-on; > > + }; > > + > > + ldo11_reg: LDO11 { > > + regulator-name = "vdd_ldo11"; > > + regulator-min-microvolt =<1000000>; > > + regulator-max-microvolt =<1000000>; > > + regulator-always-on; > > + }; > > + > > + ldo12_reg: LDO12 { > > + regulator-name = "vdd_ldo12"; > > + regulator-min-microvolt =<1800000>; > > + regulator-max-microvolt =<1800000>; > > + regulator-always-on; > > + }; > > + > > + ldo13_reg: LDO13 { > > + regulator-name = "vdd_ldo13"; > > + regulator-min-microvolt =<2800000>; > > + regulator-max-microvolt =<2800000>; > > + regulator-always-on; > > + }; > > + > > + ldo15_reg: LDO15 { > > + regulator-name = "vdd_ldo15"; > > + regulator-min-microvolt =<3100000>; > > + regulator-max-microvolt =<3100000>; > > + regulator-always-on; > > + }; > > + > > + ldo16_reg: LDO16 { > > + regulator-name = "vdd_ldo16"; > > + regulator-min-microvolt =<2200000>; > > + regulator-max-microvolt =<2200000>; > > + regulator-always-on; > > + }; > > + > > + ldo17_reg: LDO17 { > > + regulator-name = "tsp_avdd"; > > + regulator-min-microvolt =<3300000>; > > + regulator-max-microvolt =<3300000>; > > + regulator-always-on; > > + }; > > + > > + ldo19_reg: LDO19 { > > + regulator-name = "vdd_sd"; > > + regulator-min-microvolt =<2800000>; > > + regulator-max-microvolt =<2800000>; > > + regulator-always-on; > > + }; > > + > > + ldo24_reg: LDO24 { > > + regulator-name = "tsp_io"; > > + regulator-min-microvolt =<2800000>; > > + regulator-max-microvolt =<2800000>; > > + regulator-always-on; > > + }; > > + > > + buck1_reg: BUCK1 { > > + regulator-name = "vdd_mif"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck2_reg: BUCK2 { > > + regulator-name = "vdd_arm"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck3_reg: BUCK3 { > > + regulator-name = "vdd_int"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1400000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck4_reg: BUCK4 { > > + regulator-name = "vdd_g3d"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1400000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck5_reg: BUCK5 { > > + regulator-name = "vdd_mem"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1400000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck6_reg: BUCK6 { > > + regulator-name = "vdd_kfc"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck7_reg: BUCK7 { > > + regulator-name = "vdd_1.0v_ldo"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck8_reg: BUCK8 { > > + regulator-name = "vdd_1.8v_ldo"; > > + regulator-min-microvolt =<800000>; > > + regulator-max-microvolt =<1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck9_reg: BUCK9 { > > + regulator-name = "vdd_2.8v_ldo"; > > + regulator-min-microvolt =<3000000>; > > + regulator-max-microvolt =<3750000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + buck10_reg: BUCK10 { > > + regulator-name = "vdd_vmem"; > > + regulator-min-microvolt =<2850000>; > > + regulator-max-microvolt =<2850000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + }; > > + }; > > + }; > > }; > > just + DT ml.
AFAIK, current recommendation after the KS is that changes touching only DTS files don't have to be posted on DT ML. Just changes related to DT bindings such as Documentation/devicetree and DT parsing code. Full series doing both still need to be posted there, though. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
