DT nodes contain clock numbers which are referred by drivers to get the clocks. These numbers are replaced by MACROs which are defined in the exynos5420-clk.h header file.
Signed-off-by: Rahul Sharma <[email protected]> --- arch/arm/boot/dts/exynos5420.dtsi | 47 +++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e552608..db8b2da 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -17,6 +17,7 @@ #include "exynos5420-pinctrl.dtsi" #include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clk/exynos5420-clk.h> / { compatible = "samsung,exynos5420"; @@ -62,7 +63,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock 148>; + clocks = <&clock SCLK_MAUDIO0>; clock-names = "sclk_audio"; }; @@ -70,7 +71,7 @@ compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; - clocks = <&clock 401>; + clocks = <&clock ACLK_MFC>; clock-names = "mfc"; }; @@ -80,7 +81,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x2000>; - clocks = <&clock 351>, <&clock 132>; + clocks = <&clock ACLK_MMC0>, <&clock SCLK_MMC0>; clock-names = "biu", "ciu"; fifo-depth = <0x40>; status = "disabled"; @@ -92,7 +93,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x2000>; - clocks = <&clock 352>, <&clock 133>; + clocks = <&clock ACLK_MMC1>, <&clock SCLK_MMC1>; clock-names = "biu", "ciu"; fifo-depth = <0x40>; status = "disabled"; @@ -104,7 +105,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; - clocks = <&clock 353>, <&clock 134>; + clocks = <&clock ACLK_MMC2>, <&clock SCLK_MMC2>; clock-names = "biu", "ciu"; fifo-depth = <0x40>; status = "disabled"; @@ -118,7 +119,7 @@ interrupt-parent = <&mct_map>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>, <10>, <11>; - clocks = <&clock 1>, <&clock 315>; + clocks = <&clock FIN_PLL>, <&clock PCLK_MCT>; clock-names = "fin_pll", "mct"; mct_map: mct-map { @@ -207,28 +208,28 @@ }; rtc@101E0000 { - clocks = <&clock 317>; + clocks = <&clock PCLK_RTC>; clock-names = "rtc"; status = "okay"; }; serial@12C00000 { - clocks = <&clock 257>, <&clock 128>; + clocks = <&clock PCLK_UART0>, <&clock SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { - clocks = <&clock 258>, <&clock 129>; + clocks = <&clock PCLK_UART1>, <&clock SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { - clocks = <&clock 259>, <&clock 130>; + clocks = <&clock PCLK_UART2>, <&clock SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { - clocks = <&clock 260>, <&clock 131>; + clocks = <&clock PCLK_UART3>, <&clock SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -239,14 +240,14 @@ }; dp-controller@145B0000 { - clocks = <&clock 412>; + clocks = <&clock PCLK_DP1>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; fimd@14400000 { - clocks = <&clock 147>, <&clock 421>; + clocks = <&clock SCLK_FIMD1>, <&clock ACLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; @@ -254,7 +255,7 @@ compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>, <0x10040720 0x4>; interrupts = <0 106 0>; - clocks = <&clock 270>; + clocks = <&clock PCLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; io-channel-ranges; @@ -267,7 +268,7 @@ interrupts = <0 56 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 261>; + clocks = <&clock PCLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; @@ -280,7 +281,7 @@ interrupts = <0 57 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 262>; + clocks = <&clock PCLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; @@ -293,7 +294,7 @@ interrupts = <0 58 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 263>; + clocks = <&clock PCLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; @@ -306,7 +307,7 @@ interrupts = <0 59 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 264>; + clocks = <&clock PCLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; @@ -317,8 +318,8 @@ compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; - clocks = <&clock 413>, <&clock 143>, <&clock 768>, - <&clock 158>, <&clock 640>; + clocks = <&clock PCLK_HDMI>, <&clock SCLK_HDMI>, <&clock DOUT_PIXEL>, + <&clock SCLK_HDMIPHY>, <&clock MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; status = "disabled"; @@ -340,7 +341,7 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock 431>, <&clock 143>; + clocks = <&clock ACLK_MIXER>, <&clock SCLK_HDMI>; clock-names = "mixer", "sclk_hdmi"; }; @@ -348,7 +349,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; - clocks = <&clock 465>; + clocks = <&clock ACLK_GSCL0>; clock-names = "gscl"; samsung,power-domain = <&gsc_pd>; }; @@ -357,7 +358,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; - clocks = <&clock 466>; + clocks = <&clock ACLK_GSCL1>; clock-names = "gscl"; samsung,power-domain = <&gsc_pd>; }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
