From: Geert Uytterhoeven <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
---
v2:
- Clarify RSPI/QSPI
- Add interrupt-parent
- s/should/must/ for #address-cells and #size-cells
Documentation/devicetree/bindings/spi/spi-rspi.txt | 31 ++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-rspi.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt
b/Documentation/devicetree/bindings/spi/spi-rspi.txt
new file mode 100644
index 000000000000..504db8917927
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -0,0 +1,31 @@
+Device tree configuration for Renesas RSPI/QSPI driver
+
+Required properties:
+- compatible : For Renesas Serial Peripheral Interface:
+ "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
+ For Quad Serial Peripheral Interface:
+ "renesas,qspi-<soctype>", "renesas,qspi-rcar" as fallback.
+- reg : address start and address range size of device
+- interrupts : 3 interrupts for RSPI (SPEI, SPRI, SPTI),
+ 1 interrupt for QSPI
+- interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+- num-cs : Number of chip selects
+- #address-cells : must be <1>
+- #size-cells : must be <0>
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+ spi0: spi@e800c800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800c800 0x24>;
+ interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+ <0 239 IRQ_TYPE_LEVEL_HIGH>,
+ <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
