On Fri, Jan 10, 2014 at 04:40:40PM +0100, Denis Carikli wrote:
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + imx35-eukrea {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX35_PAD_LD18__GPIO3_24 0x80000000
> + MX35_PAD_LD19__GPIO3_25 0x80000000
> + MX35_PAD_LD23__GPIO3_29 0x80000000
Create pinctrl entry for gpio-leds and gpio-keys to contain them just
like other devices, and move ESDHC CD pin into esdhc1grp, so that we do
not need this hoggrp. The hoggrp should only hold the pins that do not
really belong to any client devices.
> + >;
> + };
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <MX35_AUDMUX_PINGRP1>;
> + };
> +
> + pinctrl_esdhc1: esdhc1grp {
> + fsl,pins = <MX35_ESDHC1_PINGRP1>;
> + };
> +
> + pinctrl_fec: fecgrp {
> + fsl,pins = <MX35_FEC_PINGRP1>;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <MX35_I2C1_PINGRP1>;
> + };
> +
> + pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
> + fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <MX35_UART1_PINGRP1
> MX35_UART1_RTSCTS_PINGRP1>;
Split it into two lines, one macro each.
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <MX35_UART2_PINGRP1
> MX35_UART2_RTSCTS_PINGRP1>;
Ditto
Shawn
> + };
> + };
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
