Add DT support for this codec. The bindings differ a bit from the aic3x codec bindings, so I created a new binding documentation. The difference is especially a "ti,ldo-enable" property, which enables the internal LDOs.
Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Kumar Gala <[email protected]> Cc: [email protected] Signed-off-by: Markus Pargmann <[email protected]> --- .../devicetree/bindings/sound/tlv320aic32x4.txt | 23 +++++++++++++++++ sound/soc/codecs/tlv320aic32x4.c | 30 ++++++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic32x4.txt diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt new file mode 100644 index 0000000..5c8fb4a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -0,0 +1,23 @@ +Texas Instruments - tlv320aic32x4 Codec module + +The tlv320aic32x4 serial control bus communicates through I2C protocols + +Required properties: + - compatible: Should be "ti,tlv320aic32x4" + - reg: I2C slave address + +Optional properties: + - ti,ldo-enable: Bool, has to be set when the codec is powered only through the + LDOIN pin. + - gpio-reset - gpio pin number used for codec reset + + +Example: + +codec: tlv320aic32x4@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks 201>; + clock-names = "mclk"; + ti,ldo-enable; +}; diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 1c9f1d8..840f529 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -29,6 +29,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/i2c.h> #include <linux/cdev.h> #include <linux/slab.h> @@ -669,11 +670,27 @@ static struct snd_soc_codec_driver soc_codec_dev_aic32x4 = { .num_dapm_routes = ARRAY_SIZE(aic32x4_dapm_routes), }; +static int aic32x4_parse_dt(struct aic32x4_priv *aic32x4, + struct device_node *np) +{ + aic32x4->swapdacs = false; + aic32x4->micpga_routing = 0; + aic32x4->rstn_gpio = of_get_named_gpio(np, "gpio-reset", 0); + + if (of_property_read_bool(np, "ti,ldo-enable")) + aic32x4->power_cfg = AIC32X4_PWR_AIC32X4_LDO_ENABLE; + else + aic32x4->power_cfg = 0; + + return 0; +} + static int aic32x4_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct aic32x4_pdata *pdata = i2c->dev.platform_data; struct aic32x4_priv *aic32x4; + struct device_node *np = i2c->dev.of_node; int ret; aic32x4 = devm_kzalloc(&i2c->dev, sizeof(struct aic32x4_priv), @@ -692,6 +709,12 @@ static int aic32x4_i2c_probe(struct i2c_client *i2c, aic32x4->swapdacs = pdata->swapdacs; aic32x4->micpga_routing = pdata->micpga_routing; aic32x4->rstn_gpio = pdata->rstn_gpio; + } else if (np) { + ret = aic32x4_parse_dt(aic32x4, np); + if (ret) { + dev_err(&i2c->dev, "Failed to parse DT node\n"); + return ret; + } } else { aic32x4->power_cfg = 0; aic32x4->swapdacs = false; @@ -723,10 +746,17 @@ static const struct i2c_device_id aic32x4_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, aic32x4_i2c_id); +static const struct of_device_id aic32x4_of_id[] = { + { .compatible = "ti,tlv320aic32x4", }, + { /* senitel */ } +}; +MODULE_DEVICE_TABLE(of, aic32x4_of_id); + static struct i2c_driver aic32x4_i2c_driver = { .driver = { .name = "tlv320aic32x4", .owner = THIS_MODULE, + .of_match_table = aic32x4_of_id, }, .probe = aic32x4_i2c_probe, .remove = aic32x4_i2c_remove, -- 1.8.5.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
